myTemp 65HC? 加熱和制冷培養箱

描述：

myTemp 65HC培養箱旨在提供從0℃到60℃的**和均勻的溫度控制。該儀器的較寬控溫范圍使該培養箱能適應更多的加熱和冷卻實驗。

大型數字顯示屏可以顯示培養室內溫度和剩余孵育時間，同時內部的照明系統能改善培養室的可視性。此外，內置的插座可為如混勻儀，搖床等小型設備提供動力。

采用送風技術和不銹鋼內膽，確保整個培養室熱傳遞均勻。當溫度設定低于環境溫度時，強大的壓縮機被激活，使培養室快速冷卻至所需溫度。

培養箱高39英寸（100厘米）被設計為落地式，但也足夠小巧，可放置于試驗臺（建議在低于32＂/ 81cm的臺面上使用。）儀器配有兩個可調節高度的擱板，另外的擱板也可單獨購買（項目：H2265-SH）

特點：

※ 在0℃至60℃范圍**的控溫

※ 強大的壓縮機，溫度保持0℃

※ 不銹鋼內腔

※ 培養箱內部電源插座能連接搖床和混勻儀

※ 適合放置于地面或不高于32英寸的臺面

MYTEMP? 65 HEATING AND COOLING INCUBATOR, INCLUDES TWO STAINLESS STEEL SHELVES

· Accurate temperature control from 0° to 60°C

· Powerful compressor maintains 0°C

· Stainless-steel internal chamber

· Internal power outlet for shaker, mixers, etc.

· For floor standing use or on bench-tops less than 32″ tall

· Ideal for BOD and Drosophila applications

The myTemp 65HC Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications.

A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.

With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature..

With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32″/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).

Specifications